Ddwrt Meraki Installation

[ITEM]

29.03.2020

Ddwrt Meraki Installation

Thank you for being a valued Meraki customer. Our records show that your Meraki Cloud license has expired. Yamaha fz6 forum. If you wish to continue using your Meraki networks, you must renew your license immediately. If you choose not to renew, your Meraki systems will cease to provide network access on February 2, 2016.

Meraki MR12

DD-WRT Forum Forum Index ->Atheros WiSOC based Hardware

View previous topic :: View next topic

Author

Message

wildio
DD-WRT Novice
Joined: 28 Nov 2012
Posts: 2

Posted: Wed Nov 28, 2012 1:56 Post subject: Meraki MR12

Hope this is the right place for this.......
I have several of the MR12 models and am hoping to find a solution to get dd-wrt on the devices. I've checked everywhere on the site and can't find the devices mentioned, with 1 exception that I will quote below.
I've looked at the FCC images but cannot tell what chipset is being used. Meraki's press releases keep mentioning 2x2 MIMO chipsets but other sites mention the Atheros chipset.
Anyone know of a solution to get these up and running or are there any plans to look into it more? I would certainly help where I could if it can be looked into.
According to member vysocan, this is a boot log of the unit, where Atheros is mentioned:
Code:
U-Boot 1.1.4-g0c3911dd (Mar 3 2011 - 17:08:51)
PB93 (ar7241 - Virian) U-boot
DRAM:
sri
ar7240_ddr_initial_config(133): virian ddr1 init
#### TAP VALUE 1 = 0x2, 2 = 0x2 [0x0: 0x0]
64 MB
Top of RAM usable for U-Boot at: 84000000
Reserving 272k for U-Boot at: 83fb8000
Reserving 192k for malloc() at: 83f88000
Reserving 44 Bytes for Board Info at: 83f87fd4
Reserving 36 Bytes for Global Data at: 83f87fb0
Reserving 128k for boot params() at: 83f67fb0
Stack Pointer at: 83f67f98
Now running in RAM - U-Boot at: 83fb8000
id read 0x100000ff
flash size 16MB, sector count = 256
Flash: 16 MB
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: ag7240_enet_initialize..
Fetching MAC Address from 0x83fe7ea0
Virian External MII mode MDC CFG Value > 6
: cfg1 0xf cfg2 0x7014
eth0 link down
eth0: 00:03:7f:e0:00:2a
ATHRSF1_PHY: PHY unit 0x0, address 0x4, ID 0xd04e,
ATHRSF1_PHY: Port 0, Neg Success
ATHRSF1_PHY: unit 0 port 0 phy addr 4
eth0 up
eth0
RESET is un-pushed
Hit any key to stop autoboot: 0
part0: Copying image to memory .. done.
part0: Checking sha1 (from 0x80060000 length 4355864) .. match
part0: sha1 calculated: 98da1ae203ddb734494bb4311c1fed1cfdf870b1
## Starting application at 0x80060000 ..
starting stage2
decompressing embedded kernel image 0x81a021b0(0x425545)
got osize 0ff7a10
..........done
starting linux
Booting AR7240(Python)..
[ 0.000] Linux version 2.6.16.16-meraki-ar7100 (ralucam@b5station) (gcc version 4.5.3 (GCC) ) #2 Fri Sep 28 15:33:34 PDT 2012
[ 0.000] flash_size passed from bootloader = -1
[ 0.000] setting it to 16 anyway
[ 0.000] CPU revision is: 00019374
[ 0.000] Determined physical RAM map:
[ 0.000] memory: 04000000 @ 00000000 (usable)
[ 0.000] Built 1 zonelists
[ 0.000] Kernel command line: 'console=ttyS0,115200 root=01:00 rd_start=0x80600000 rd_size=8388608 init=/sbin/init'
[ 0.000] Primary instruction cache 64kB, physically tagged, 4-way, linesize 32 bytes.
[ 0.000] Primary data cache 32kB, 4-way, linesize 32 bytes.
[ 0.000] Synthesized TLB refill handler (20 instructions).
[ 0.000] Synthesized TLB load handler fastpath (32 instructions).
[ 0.000] Synthesized TLB store handler fastpath (32 instructions).
[ 0.000] Synthesized TLB modify handler fastpath (31 instructions).
[ 0.000] Cache parity protection disabled
[ 0.000] PID hash table entries: 512 (order: 9, 8192 bytes)
[ 0.000] Using 200.000 MHz high precision timer.
[ 0.001] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.002] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.009] Memory: 47640k/65536k available (1443k kernel code, 17840k reserved, 352k data, 14552k init, 0k highmem)
[ 0.032] Mount-cache hash table entries: 512
[ 0.033] Checking for 'wait' instruction.. available.
[ 0.035] unpacking initramfs..done in 0.175000
[ 0.213] NET: Registered protocol family 16
[ 0.214] PCI init:ar7240_pcibios_init
[ 0.215] ar7240_pcibios_init(298): PCI CMD write: 0x356
[ 0.226] Algorithmics/MIPS FPU Emulator v1.5
[ 0.238] Returning IRQ 48
[ 0.561] JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
[ 0.562] Initializing Cryptographic API
[ 0.563] io scheduler noop registered
[ 0.564] io scheduler deadline registered (default)
[ 0.608] Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
[ 0.622] serial8250: ttyS0 at MMIO 0x0 (irq = 19) is a 16550A
[ 0.664] AG7240: Length per segment 1536
[ 0.665] AG7240: Max segments per packet 2
[ 0.666] AG7240: Max tx descriptor count 200
[ 0.667] AG7240: Max rx descriptor count 252
[ 0.668] AG7240: fifo cfg 3 01f00140
[ 0.669] AG7240CHH: Mac address for unit 0
[ 0.670] AG7240CHH: 00:03:7f:ff:ff:ff
[ 0.885] AG7240CHH: Mac address for unit 1
[ 0.886] AG7240CHH: 00:03:7f:ff:ff:fe
[ 1.115] tun: Universal TUN/TAP device driver, 1.6
[ 1.116] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.131] Creating 8 MTD partitions on 'ar7100-nor0':
[ 1.132] 0x00000000-0x00080000 : 'Uboot & env'
[ 1.174] 0x00080000-0x000a0000 : 'board config'
[ 1.216] 0x000a0000-0x000c0000 : 'panic'
[ 1.258] 0x000c0000-0x002c0000 : 'storage'
[ 1.300] 0x00fe0000-0x01000000 : 'caldata'
[ 1.329] 0x002c0000-0x007e0000 : 'part1'
[ 1.371] 0x00940000-0x00e60000 : 'part2'
[ 1.413] 0x00000000-0x01000000 : 'ALL'
[ 1.455] i2c /dev entries driver
[ 1.470] NET: Registered protocol family 2
[ 1.489] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 1.490] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 1.491] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 1.492] TCP: Hash tables configured (established 4096 bind 4096)
[ 1.493] TCP reno registered
[ 1.494] TCP bic registered
[ 1.495] NET: Registered protocol family 1
[ 1.496] NET: Registered protocol family 17
[ 1.497] ar7240wdt_init: Registering WDT success
[ 1.516] Freeing unused kernel memory: 14552k freed
init started: BusyBox v1.1.0 (2012.05.16-07:00+0000) multi-call binary
Please press Enter to activate this console. : sysctl: error: 'kernel.softlockup_panic' is an unknown key
: sysctl: error: 'kernel.hung_task_panic' is an unknown key
: sysctl: error: 'vm.panic_on_oom' is an unknown key
[ 2.790] module load for dummy load 0.062000 init 0.061000 total 0.123000
[ 2.896] ag7240_ring_alloc Allocated 3200 at 0x83186000
[ 2.897] ag7240_ring_alloc Allocated 4032 at 0x831c8000
[ 2.899] Virian CFG Value > 6
[ 2.900] Virian MDC CFG Value > 6
[ 2.901] ATHRSF1_PHY: athr_reg_init
[ 2.902] Setting PHY..
[ 2.903] ATHRSF1_PHY: Port 0, Neg Success
[ 2.904] ATHRSF1_PHY: unit 0 phy addr 4 Not enabling interrupts in AR7242 yet..
[ 2.983] ag7240_ring_alloc Allocated 3200 at 0x8101a000
[ 2.984] ag7240_ring_alloc Allocated 4032 at 0x832ba000
[ 2.986] Virian mac 1 CFG Value > 6
[ 2.987] Virian MDC CFG Value > 6
[ 2.988] ATHRS26: resetting s26
[ 3.089] ATHRS26: s26 reset done
[ 3.093] Setting PHY..
[ 5.070] ath_hal: module license 'Proprietary' taints kernel.
[ 5.125] ath_hal: 0.9.17.1 (AR5416, DEBUG, REGOPS_FUNC, PRIVATE_DIAG, WRITE_EEPROM, 11D, AH_SUPPORT_EEPROM_AR9287)
[ 5.132] module load for ath_hal load 0.065000 init 0.007000 total 0.072000
[ 5.412] ath_dfs: Version 2.0.0
[ 5.412] Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
[ 5.413] module load for ath_dfs load 0.067000 init 0.001000 total 0.068000
[ 5.574] ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
[ 5.575] module load for ath_rate_atheros load 0.068000 init 0.001000 total 0.069000
[ 5.782] wlan: 0.8.4.2 (Atheros/multi-bss)
[ 5.783] module load for wlan load 0.114000 init 0.001000 total 0.115000
[ 5.944] ath_spectral: Version 2.0.0
[ 5.944] Copyright (c) 2005-2009 Atheros Communications, Inc. All Rights Reserved
[ 5.945] SPECTRAL module built on Sep 28 2012 15:32:12
[ 5.946] module load for ath_spectral load 0.068000 init 0.002000 total 0.070000
[ 6.128] ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
[ 6.129] module load for ath_dev load 0.088000 init 0.001000 total 0.089000
[ 6.305] module load for proclikefs load 0.064000 init 0.000000 total 0.064000
Single synchronous check for reset
[ 6.550] ath_pci: 0.9.4.5 (Atheros/multi-bss)
[ 6.622] Overriding DFS domain with 1
[ 6.624] DFS min filter rssiThresh = 18
[ 6.625] DFS max pulse dur = 131 ticks
[ 6.627] ath_descdma_setup: tx DMA map: a03a0000 (75776) -> 3a0000 (75776)
[ 6.628] ath_descdma_setup: beacon DMA map: a12a7000 (2960) -> 12a7000 (2960)
[ 6.629] ath_descdma_setup: rx DMA map: a3f90000 (37888) -> 3f90000 (37888)
[ 6.694] wifi0: Atheros 9280: mem=0x10000000, irq=48 hw_base=0xb0000000 ver=0x80 rev=0x2
[ 6.695] module load for ath_pci load 0.081000 init 0.145000 total 0.226000
[ 7.078] module load for merakiclick load 0.268000 init 0.002000 total 0.270000
[ 7.086] click: starting router thread pid 424 (83197880)
[ 7.315] module load for pca9534 load 0.062000 init 0.061000 total 0.124000
[ 7.484] wlan: mac acl policy registered
[ 7.485] module load for wlan_acl load 0.063000 init 0.001000 total 0.064000
[ 7.635] module load for wlan_ccmp load 0.043000 init 0.000000 total 0.043000
[ 7.829] module load for wlan_scan_ap load 0.066000 init 0.000000 total 0.066000
[ 8.002] module load for wlan_scan_sta load 0.066000 init 0.000000 total 0.066000
[ 8.173] module load for wlan_tkip load 0.064000 init 0.000000 total 0.064000
[ 8.344] module load for wlan_wep load 0.063000 init 0.000000 total 0.063000
[ 8.513] module load for wlan_xauth load 0.062000 init 0.000000 total 0.062000
init-boot: boot 29 build 19-94893 board ar7100 mac 00:18:0A:21:A4:3D
: modules: Module: dummy .text=0xc0053000 .data=0xc00534f0 .bss=0xc0053640
: modules: Module: ath_hal .text=0xc00b2000 .data=0xc00f73a0 .bss=0xc00fae20
: modules: Module: ath_dfs .text=0xc0066000 .data=0xc006ec40 .bss=0xc006edc0
: modules: Module: ath_rate_atheros .text=0xc0060000 .data=0xc0063990 .bss=0xc0063d00
: modules: Module: wlan .text=0xc0162000 .data=0xc01a2050 .bss=0xc01a39c0
: modules: Module: ath_spectral .text=0xc008f000 .data=0xc0097f00 .bss=0xc0098080
: modules: Module: ath_dev .text=0xc01a5000 .data=0xc01cdf30 .bss=0xc01ce320
: modules: Module: proclikefs .text=0xc005c000 .data=0xc005d0e0 .bss=0xc005d220
: modules: Module: ath_pci .text=0xc0107000 .data=0xc01139c0 .bss=0xc0113f80
: modules: Module: merakiclick .text= .data= .bss=
: modules: Module: pca9534 .text=0xc009c000 .data=0xc009c770 .bss=0xc009cbc0
: modules: Module: wlan_acl .text=0xc009e000 .data=0xc009ee30 .bss=0xc009ef80
: modules: Module: wlan_ccmp .text=0xc0050000 .data=0xc0051c00 .bss=0xc0051d40
: modules: Module: wlan_scan_ap .text=0xc00ac000 .data=0xc00ade10 .bss=0xc00adf60
: modules: Module: wlan_scan_sta .text=0xc00a6000 .data=0xc00a87b0 .bss=0xc00a8900
: modules: Module: wlan_tkip .text=0xc011c000 .data=0xc011ecd0 .bss=0xc011ee20
: modules: Module: wlan_wep .text=0xc0122000 .data=0xc01234f0 .bss=0xc0123640
: modules: Module: wlan_xauth .text=0xc0115000 .data=0xc0115230 .bss=0xc0115380

Sponsor
<=' td='>

wildio
DD-WRT Novice
Joined: 28 Nov 2012
Posts: 2

Posted: Wed Nov 28, 2012 13:47 Post subject:
Understandable. how does one go about donating one?

Sash
DD-WRT Guru
Joined: 20 Sep 2006
Posts: 17638
Location: Hesse/Germany

Posted: Wed Nov 28, 2012 23:34 Post subject:
http://www.dd-wrt.com/site/community/donations _________________ Forum Guidelines..How to get help & Forum Rules & RTFM/STFW & Throw some buzzwords into the WIKI search _________________ I'm NOT rude, just offer pure facts! _________________ Atheros (TP-Link & Clones, etc ) debrick service in EU _________________ Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!

fingersuk
DD-WRT Novice
Joined: 04 Feb 2013
Posts: 1

Posted: Mon Feb 04, 2013 15:13 Post subject:
Did anyone make any progress on this just received my MR12 but didnt want to plug it in and setup the cloud as id rather run it on WRT.. Thanks

tylerwatt12
DD-WRT Novice
Joined: 09 Aug 2011
Posts: 6

Posted: Mon Mar 25, 2013 22:57 Post subject:
Took some hi-res pictures http://minus.com/mbel3nt6AYCnVv NT5DS32M16DS – 5T 32Mx16 512MB DDR 200MHz CL3,3,3 Atheros AR7242-AH1A It seems to have some sort of array of pins labeled PJB8101, JP2, J1, and T4

rt_rex
DD-WRT User
Joined: 07 Jun 2006
Posts: 106

Posted: Tue May 07, 2013 9:03 Post subject:
To get a Free MR12 just attned a webminar @ http://www.meraki.com/webinars and get your free MR12. You will need a business domain email, google,hotmail,etc emails are not acepted. _________________ wireless link @ 76 km https://www.youtube.com/watch?v=rrXanzlro78

uhf-satcom
DD-WRT Novice
Joined: 12 Jul 2013
Posts: 1

Posted: Fri Jul 12, 2013 15:43 Post subject: Meraki

Hi all,
These AP's have TTL serial console port internally on J1, running at 115200/8/n/1
Also via wlan client connection, there is http://my.meraki.com/configure/raw_upgrade.html which allows direct firmware upgrades, not covered by warranty etc.
AP's are quite interesting to explore, They establish a ptp tunnel out to a 6.x.x.x network which is used for comms between Meraki and your AP.
regards,
uhf-satcom

revellion
DD-WRT Novice
Joined: 21 Feb 2011
Posts: 1

Posted: Sat Jan 18, 2014 23:02 Post subject:
No update on this?

rt_rex
DD-WRT User
Joined: 07 Jun 2006
Posts: 106

Posted: Wed May 21, 2014 21:52 Post subject:

Just took my MR12 from the dust and did a port scan with nmap and found this open ports.

Code:

Starting Nmap 6.40 ( http://nmap.org ) at 2014-05-21 00:58 WEST
Nmap scan report for ap.meraki.net (10.128.128.126)
Host is up (0.0017s latency).
Not shown: 63976 filtered ports, 1020 closed ports
PORT STATE SERVICE
22/tcp open ssh -- dont know the password for this service
53/tcp open domain
80/tcp open http
7751/tcp open unknown

FCC info
https://apps.fcc.gov/oetcf/eas/reports/ViewExhibitReport.cfm?mode=Exhibits&RequestTimeout=500&calledFromFrame=Y&application_id=161321&fcc_id=UDX-60013010
Also found that it responds on 10.128.128.128 and 10.128.128.126.
And it tries to connect to 6.33.182.151

Code:

Overview for 6.33.182.151
Updated 34 seconds ago
NetRange: 6.0.0.0 - 6.255.255.255
CIDR: 6.0.0.0/8
OriginAS:
NetName: CONUS-YPG-NET
NetHandle: NET-6-0-0-0-1
Parent:
NetType: Direct Allocation
RegDate: 1994-02-01
Updated: 2011-02-24
Ref: http://whois.arin.net/rest/net/NET-6-0-0-0-1
OrgName: Headquarters, USAISC
OrgId: HEADQU-3
Address: NETC-ANC CONUS TNOSC
City: Fort Huachuca
StateProv: AZ
PostalCode: 85613
Country: US
RegDate: 1990-03-26
Updated: 2011-08-17
Ref: http://whois.arin.net/rest/org/HEADQU-3
OrgAbuseHandle: REGIS10-ARIN
OrgAbuseName: Registration
OrgAbusePhone: +1-800-365-3642
OrgAbuseEmail: disa.columbus.ns.mbx.arin-registrations@mail.mil
OrgAbuseRef: http://whois.arin.net/rest/poc/REGIS10-ARIN
OrgTechHandle: REGIS10-ARIN
OrgTechName: Registration
OrgTechPhone: +1-800-365-3642
OrgTechEmail: disa.columbus.ns.mbx.arin-registrations@mail.mil
OrgTechRef: http://whois.arin.net/rest/poc/REGIS10-ARIN

Hope it helps
_________________
wireless link @ 76 km
https://www.youtube.com/watch?v=rrXanzlro78

person
DD-WRT Novice
Joined: 03 Mar 2009
Posts: 7

Posted: Mon Jul 07, 2014 7:03 Post subject:
any further update on this? i have a MR12 with expired subscription

sudobash
DD-WRT Novice
Joined: 05 May 2010
Posts: 3

Posted: Wed Nov 12, 2014 6:50 Post subject: Meraki MR12 OpenWRT

I have 2 MR12's that I just got running on OpenWRT, would like to help further support for dd-wrt.
I have a couple of jtag programmers waiting if needed..
[ 0.000000] Linux version 3.10.49 (riptide_wave@FREYA-990FX-GEN3-R2) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r43039) ) #2 Thu Oct 23 21:08:34 CDT 2014
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[ 0.000000] SoC: Atheros AR7242 rev 1
[ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:5.000MHz
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x03ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] free_area_init_node: node 0, pgdat 8030a9b0, node_mem_map 81000000
[ 0.000000] Normal zone: 128 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16384 pages, LIFO batch:3
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
[ 0.000000] Kernel command line: board=MR12 console=ttyS0,115200 mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,6144k(rootfs),1024k(kernel),256k(nvram),8448k(ard
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 59360k/65536k available (2230k kernel code, 6176k reserved, 577k data, 2180k init, 0k highmem)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.080000] Calibrating delay loop.. 265.42 BogoMIPS (lpj=1327104)
[ 0.080000] pid_max: default: 32768 minimum: 301
[ 0.080000] Mount-cache hash table entries: 512
[ 0.090000] NET: Registered protocol family 16
[ 0.100000] MIPS: machine is Meraki MR12
[ 0.100000] ar71xx: pll_reg 0xb805002c: 0x62000000
[ 0.300000] registering PCI controller with io_map_base unset
[ 0.310000] bio: create slab <bio-0> at 0
[ 0.320000] PCI host bridge to bus 0000:00
[ 0.320000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[ 0.330000] pci_bus 0000:00: root bus resource [io 0x0000]
[ 0.330000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.340000] pci 0000:00:00.0: [168c:002a] type 00 class 0x028000
[ 0.340000] pci 0000:00:00.0: fixup device configuration
[ 0.340000] pci 0000:00:00.0: reg 10: [mem 0x10000000-0x1000ffff 64bit]
[ 0.340000] pci 0000:00:00.0: supports D1
[ 0.340000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.340000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.340000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
[ 0.350000] pci 0000:00:00.0: using irq 40 for pin 1
[ 0.350000] Switching to clocksource MIPS
[ 0.360000] NET: Registered protocol family 2
[ 0.360000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[ 0.370000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[ 0.380000] TCP: Hash tables configured (established 512 bind 512)
[ 0.380000] TCP: reno registered
[ 0.390000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.390000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.400000] NET: Registered protocol family 1
[ 0.400000] PCI: CLS 0 bytes, default 32
[ 4.270000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 4.280000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 4.290000] msgmni has been set to 115
[ 4.300000] io scheduler noop registered
[ 4.300000] io scheduler deadline registered (default)
[ 4.310000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 4.330000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
[ 4.340000] console [ttyS0] enabled, bootconsole disabled
[ 4.350000] ath79-spi ath79-spi: master is unqueued, this is deprecated
[ 4.360000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 4.370000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 4.370000] 7 cmdlinepart partitions found on MTD device spi0.0
[ 4.380000] Creating 7 MTD partitions on 'spi0.0':
[ 4.380000] 0x000000000000-0x000000040000 : 'u-boot'
[ 4.390000] 0x000000040000-0x000000080000 : 'u-boot-env'
[ 4.400000] 0x000000080000-0x000000680000 : 'rootfs'
[ 4.400000] mtd: device 2 (rootfs) set to be root filesystem
[ 4.410000] mtdsplit: no squashfs found in 'rootfs'
[ 4.420000] mtdsplit: no squashfs found in 'spi0.0'
[ 4.420000] 0x000000680000-0x000000780000 : 'kernel'
[ 4.430000] 0x000000780000-0x0000007c0000 : 'nvram'
[ 4.430000] 0x0000007c0000-0x000001000000 : 'art'
[ 4.440000] 0x000000080000-0x000000780000 : 'firmware'
[ 4.460000] libphy: ag71xx_mdio: probed
[ 5.010000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:04 [uid=004dd04e, driver=Generic PHY]
[ 5.020000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
[ 5.030000] TCP: cubic registered
[ 5.030000] NET: Registered protocol family 17
[ 5.040000] 8021q: 802.1Q VLAN Support v1.8
[ 5.060000] Freeing unused kernel memory: 2180K (8031f000 - 80540000)
[ 10.750000] NET: Registered protocol family 10
[ 10.770000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 10.780000] Loading modules backported from Linux version master-2014-10-08-0-g0275925
[ 10.790000] Backport generated by backports.git backports-20140905-1-gde42785
[ 10.800000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.820000] nf_conntrack version 0.5.0 (961 buckets, 3844 max)
[ 10.870000] xt_time: kernel timezone is -0000
[ 10.910000] cfg80211: Calling CRDA to update world regulatory domain
[ 10.910000] cfg80211: World regulatory domain updated:
[ 10.920000] cfg80211: DFS Master region: unset
[ 10.920000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 10.930000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.940000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.950000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.960000] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.960000] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 10.970000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 10.980000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.990000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 11.070000] PPP generic driver version 2.4.2
[ 11.080000] NET: Registered protocol family 24
[ 11.130000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 11.140000] ath: EEPROM regdomain: 0x0
[ 11.140000] ath: EEPROM indicates default country code should be used
[ 11.140000] ath: doing EEPROM country->regdmn map search
[ 11.140000] ath: country maps to regdmn code: 0x3a
[ 11.140000] ath: Country alpha2 being used: US
[ 11.140000] ath: Regpair used: 0x3a
[ 11.160000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 11.170000] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=40
[ 11.200000] cfg80211: Calling CRDA for country: US
[ 11.200000] cfg80211: Regulatory domain changed to country: US
[ 11.210000] cfg80211: DFS Master region: FCC
[ 11.210000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 11.220000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 11.230000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
[ 11.240000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
[ 11.250000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 11.250000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 20.190000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.190000] device eth0 entered promiscuous mode
[ 20.210000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 21.120000] eth0: link up (1000Mbps/Full duplex)
[ 21.120000] br-lan: port 1(eth0) entered forwarding state
[ 21.130000] br-lan: port 1(eth0) entered forwarding state
[ 21.130000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.190000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 23.130000] br-lan: port 1(eth0) entered forwarding state
I also have dumps of the stock firmware for debrick/revert if anyone needs.

sudobash
DD-WRT Novice
Joined: 05 May 2010
Posts: 3

Posted: Mon Dec 08, 2014 19:11 Post subject: Ready
I feel like we have all the information needed. I'm a hobbyist programmer but haven't done anything with MIPS in a while. Someone point me in the right direction towards building this. Again, I have serial access running OpenWRT already. I've had to jtag to SPI FLASH chips before, so lets get a roll on this, I'm not scared.

torankusu
DD-WRT User
Joined: 11 Feb 2013
Posts: 61

Posted: Mon Dec 08, 2014 19:41 Post subject:
here hoping that this picks up. i have a mr12,18,26 and mr34 about to expire in 8 months, hopefully by then this is a reality.

voducngh
DD-WRT Novice
Joined: 15 Apr 2012
Posts: 3

Posted: Tue Jun 09, 2015 12:48 Post subject: Following up for Meraki MR12

Hello
Do you have any news about these Meraki ? Donation for the Community here ? or testing more intensively

torankusu wrote:

here hoping that this picks up.
i have a mr12,18,26 and mr34 about to expire in 8 months, hopefully by then this is a reality.

DD-WRT Forum Forum Index ->Atheros WiSOC based Hardware

All times are GMT

Navigation

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Author: admin
Category: Category

[/ITEM]

[/MAIN]

29.03.2020